· 4 min read · School of Hotels

Room status codes every hotel employee should know

Walk past the housekeeping office of any hotel and you will see a board, or a screen, full of two- and three-letter codes. They describe the state of every room, and they are the shared language between housekeeping, the front desk and maintenance.

The basic codes

A room status has two parts: is the room occupied or vacant, and is it clean or dirty? Combining them gives the four everyday codes:

CodeMeaningWhat it tells the front desk
VC - vacant cleanEmpty, cleaned, ready to sellCan be assigned to an arriving guest (many hotels add VI, vacant inspected, after the supervisor's check)
VD - vacant dirtyGuest has checked out, room not yet cleanedDo not assign; chase housekeeping if arrivals are waiting
OC - occupied cleanGuest in-house, room serviced todayNothing to do
OD - occupied dirtyGuest in-house, room not yet servicedService it before the guest returns

Codes that block a room

  • OOO - out of order. The room cannot be sold because something is broken: no hot water, a damaged bed, a failed air conditioner. It is removed from the available inventory, which affects occupancy figures, so it needs a maintenance request and a date when it comes back.
  • OOS - out of service. The room is temporarily held back for a short reason - deep cleaning, a painter for the afternoon - but it still counts as inventory and can be released quickly.

Codes about the guest

  • DND - do not disturb. The guest has asked not to be disturbed. Housekeeping notes the time and tries again later; if a room stays on DND for a long time, a supervisor follows the hotel's welfare-check procedure.
  • Due out. The guest is expected to check out today. Housekeeping plans to clean the room after departure, and the front desk knows the room will be available for tonight's arrivals.
  • Sleep-out / skip. Housekeeping found the bed untouched, or the room empty with the luggage gone, although the system shows it occupied. Either way the front desk must investigate.
  • Discrepancy. Housekeeping's physical check and the front office system disagree - for example housekeeping finds a vacant room that the system shows as occupied. Discrepancies are reported immediately because they usually mean a missed check-out, an unpaid bill or a security problem.

Who changes the status, and when

  1. Check-out - the front desk changes the room from occupied to vacant dirty the moment the guest settles the bill.
  2. Cleaning - the room attendant finishes and marks the room clean (in many hotels only the supervisor can mark it inspected).
  3. Inspection - the supervisor checks the room and releases it as vacant clean / inspected. Only now may the front desk assign it.
  4. Faults - anyone who finds a fault reports it; maintenance or the executive housekeeper decides whether the room becomes OOS or OOO.
  5. Check-in - the front desk assigns the room and it becomes occupied.

In a modern property management system each of these steps is a click, and the front desk sees the change at once. On paper, the housekeeping report is walked to the front desk at fixed times - which is exactly when discrepancies creep in.

Why it matters

A wrong status is never "just a code". A room shown clean that is in fact dirty puts a guest into a dirty room. A room shown occupied that is in fact vacant is a room the hotel could have sold tonight. A room shown out of order with no return date quietly lowers the hotel's revenue for weeks.

Learn the full procedure in Housekeeping department and room status and Room inspection by the housekeeping supervisor, both in Module 4 of the course.


Free hotel operations course
79 video lessons in Urdu and English. Join the waiting list with your email and mobile number.
Join the waiting list